ergomo^® pro measures your power in watt during cycling in the bottom bracket, exactly where it is generated. The new ergomo^® pro is applicable in road and track racing, triathlon and mountain biking. On the basis of 72 measurements per minute the torque and cadence is registered and out of this your current power is released. Your individual wattage data is displayed in the big screen on your egomo pro computer with an imprecision of only ± 1,5 percent. So you can always see your power and follow their evolution.

What has to be considered with the purchase?

• Steering wheel diameter
• width bottom bracket cage
• interior camp threads metric/BSA
• type of oh (Square/Octalink/ISIS)
• which type of crank (2 or triple)

In the total package ergomo pro are contained:
ergomo® computers and - sensor, PC software, operating instructions, owner- training manual, transmission cable, cable strap, reed contact and magnet, assembly tool, battery charger with different adapters and spacer rings.

in which measuring range measures ergomo®?
Ergomo® measures between 0 and 2500 Watts with a measuring accuracy of + - 1%

Is the heart rate signal coded? Which chest belts can be used?
The scope of supply ergomo® does not contain a chest belt. The Ergomo® product series is equipped with a coded polar chip on board, so that with an appropriate belt a coded transmission is guaranteed.

Can I also transmit the data of ergoRacer®?
Yes, you can transmit these files as csv, srm txt, hrm, or as more computrainer cs.txt directly by e-mail.

What is to be considered during the calibration of the system?
Before installation the k-factor (displayed on the sensor) is to note (K, cal). This is to be entered in the menu ergomo® pro computer. Afterwards the offset is to be accomplished. For this the right crank must be accelerated evenly! The best results can be obtained, if the large chain ring is combined with the smallest pinion gear.

ADVANTAGES OF ergomo® pro

All the important performance data available in a single system: including power in watts, heart rate, speed, cadence, energy consumption, altitude measurement, and many other features.

Better interpretation of heart rate (= training response) in comparison to performance (= training dose).

Easy determination of optimal training intensity for each cyclist. No more overtraining!

Perfect analysis of training and competition by computer analysis on your PC – fast, simple, clear.

Better use of individual strengths; clear indications for overcoming weaknesses.

Optimized collaboration with your coach – at a glance you get all the data needed for planning efficient training and easily share this with your coach.

control of nutrition and energy intake – before, after, and during training. You can train harder, recover faster, and deliver top performance even in critical (racing) situations.

Use of the system as a “virtual wind tunnel” – to determine optimal bike positioning and aerodynamics (most important factor influencing speed).

Technical data:

Sensor:

• Measurement precision: ±1,5%
• Measurement range: 0 – 2.500 Watt
• Shaft: ISO square
• Weight: 290 g
• Housing for sensor: BSA, metric
• Data transfer: Shielded cable

Computer:

• Weight 80 g / 65 g
• Power: 0 – 2.500 Watt
• Torque: 0 – 450 Nm
• Energy: kJoule + kCal
• Pedaling cadence: 20 – 250 U/min
• Heart rate: 30 – 250 1/min
• Speed: 0 – 199 km/h or mph
• Distance: km or mph
• Time: h : min : sec
• Stopwatch: h : min : sec
• Date: day : month : year
• Temperature: –20°C to +60°C
• Altitude: –100 m to +6.000 m / not available
• Battery operation: 28.000 hours / not available
• Storage capacity
• 8 h at 1 sec intervals, 40 h at 5 sec,
• 80 h at 10 sec, 120 h at 15 sec,
• 240 h at 30 sec
• Operating time: 40 hours for fully charged battery
• Interface: Serial / infrared
• Software: ergoRacer®