SwissStop brake pads Disc 31 (Avid), Organic (2 pcs.)

High performance Kevlar, ceramic, brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable).

COMPATIBILITY

SRAM

• G2 Ultimate, RSC
• Guide Ultimate, RSC, RS, R,T 

AVID 

• XO Trail 
• Elixir 9 Trail 
• Elixir 7 Trail

ATTENTION: The brake pads must be run in to achieve optimum braking power and durability.

Step 1: On a downhill slope of medium steepness, let the front and rear brakes drag alternately for 20-30 seconds.
Repeat this procedure 2-3 times.

Step 2: On a steeper downhill slope, let both brakes drag alternately for 10-15 seconds each and finish the braking with an almost complete stop.
Repeat this procedure 2-3 times.

Pro-Tip: Run in the brake pads for the rear brake on the front wheel. Exactly as described above. Then mount the pads on the rear. Let it drag 2-3 times on a flat road. Caution: Before replacing the pads, allow them to cool down sufficiently: Danger of burns!